In addition to correct use, safe use of hot melt glue machines is also crucial.

When using a hot melt glue machine, the temperature inside the machine can reach over 100 degrees Celsius. Be especially careful to avoid burns.

During glue dispensing, the glue liquid temperature can also reach over 100 degrees Celsius. Be especially careful during use. If you get burned, don't panic. Immediately place your burned hand under clean, cool water until the heat dissipates. When using a hot melt adhesive machine safely, please pay attention to the following five points: 1. Keep the hot melt adhesive machine's working environment clean while in use. Promptly remove any infusible impurities, iron filings, and other solid objects. 2. When moving the hot melt adhesive machine, ensure it is held vertically. Any tilt will affect the machine's positioning accuracy and may damage the machine.

3. During use, the hot melt machine must promptly remove any infusible impurities, iron filings, and other solid objects.

4. When moving the hot melt machine to a new location, turn off the power and allow it to cool down before moving it to avoid burns.

5. When moving or lifting the hot melt machine, only use the bottom of the machine as a fulcrum. Do not use the cylinder, door, control panel, or other electronic components of the hot melt machine as a fulcrum to lift and move it, as this can easily damage the machine. Hot melt machines must be used not only normally but also safely. Proper use can extend the life of your hot melt machine and reduce malfunctions. Safe use can protect you from the machine's high temperatures and other unexpected issues.